Helix M One X - 1 Kanal

HELIX M ONE X

Small, efficient and unconditionally stable - the M ONE X is a highly compact monoblock for subwoofer applications. Built using the latest Class D technology, this amplifier can handle even loudspeakers with an impedance of just 1 ohm in a controlled manner. Its ability to deliver current predestines it for the combination with 2 x 2 ohm subwoofers, in which both voice coils are connected in parallel.

And for even more concentrated power, two M ONE X amplifiers can be connected together to form a large power pack thanks to the TwinPower Link.

In addition, there is extensive and extraordinarily practical equipment that leaves nothing to be desired. And finally, thanks to the small dimensions, there is always an installation space for this mini power plant.

Features

✓ Particularly compact Class D amplifier with up to 1,180 watts RMS maximum power at 1 ohm - ideal for the combination with all 2 x 2 ohm subwoofers in parallel operation

✓ Start-stop capability down to 6V supply voltage

✓ Intelligent high-level input with ADEP circuit and automatic switch-on

✓ Integrated, active crossover with low pass, bass boost, subsonic and phase

✓ TwinPower Link for operating two amplifiers in bridge mode

✓ Wired remote control for volume control

✓ Low heat generation thanks to very high efficiency

Special Features:

✓ Intelligent high level input

Modern, factory-installed car radios are becoming more and more intelligent when it comes to diagnosing the connected loudspeakers. If an amplifier is connected to the radio instead, error messages or the loss of individual functions (e.g. faders) usually occur. The new ADEP circuit (Advanced Diagnostics Error Protection) prevents all these problems without unnecessarily loading the speaker outputs of the radio at high levels.

 

✓ start-stop capability

The power pack in the HELIX M ONE X amplifier ensures the internal power supply even in the event of short-term dips down to 6 volts. This ensures that the HELIX M ONE X remains fully functional even when the engine is started.

 

Technical specifications

Power RMS ≤ 1% THD+N	normal operation (an amplifier)	TwinPower Link (Two amplifiers)
- @ 4 Ohm	1 x 400 Watt	1 x 1.400 Watt
- @ 2 Ohm	1 x 700 Watt	1 x 2.060 Watt
- @ 1 Ohm	1 x 1.030 Watt	-
- bridged on 4 Ohm	-	-
- bridged on 2 Ohm	-	-
Maximum power pro Kanal*	Up to 1,180 watts RMS @ 1 Ohm
amplifier technology	Class D
inputs	2 x Cinch 2 x Hochpegel- speaker input 1 x Remote In 1 x remote control entry
input sensitivity	Cinch 0.5 - 6 Volts Hochpegel 1.1 - 13 Volts
Input impedance Cinch	20 kOhm
Input impedance high level	9 - 33 Ohm
exits	1 x speaker output
Output voltage cinch	-
signal converter for the digital input	-
frequency range	10 Hz - 250 Hz
Bass Boost	0 - 12 dB / 30 - 80 Hz
Hochpass	-
Tiefpass	50Hz - 250Hz adjustable
Bandpass	10 Hz - 250 Hz adjustable
Subsonic	10 Hz - 50 Hz adjustable
Phase	0 - 180° adjustable
Slope steepness high/low pass	-
Slope steepness subsonic / low pass	12 / 24 dB/oct.
Signal to noise ratio digital input	-
Signal-to-noise ratio analog input	95 dB (A-weighted)
Klirrfactor (THD)	0,20 %
damping factor	150
operating voltage	10.5 - 16 volts (max. 5 sec down to 6 volts)
no-load current consumption	800 mA
fuse	3 x 40 A maxi plug-in fuse (FK3)
Additional features	Active, adjustable crossover, bass boost, Phase shift, start-stop capability, high-level input with automatic switch-on and Advanced Diagnostics Error Protection (ADEP), bass-level cable remote control
Dimensions	50 x 320 x 154 mm

✓ scope of delivery

1 x Amplifier Helix M ONE X

1 * wired remote control

1 x mounting material

1 * Instruction Manual


🗒Instruction Manual
☞(Download)

Shipping countries:
✓ Germany
✓ Austria
✓ France