Auto-Connect IBC25X 25A

The Auto-Connect IBC25X smart high-performance charger is designed for cars, motorcycles, boats, and other vehicles. It supports 6-V, 12-V, and 24-V systems and is compatible with a wide range of battery types, including AGM, GEL, wet cell, MF, and LiFePO4. The IBC25X uses a smart 9-stage charging process that automatically adapts to the battery’s condition.


Features:

• Smart 25A Battery Charger
• Compatible with 6V, 12V, and 24V batteries (AGM, GEL, WET, MF, LiFePO4)
• Backlit LCD display
• Operates at temperatures ranging from -20 °C to +50 °C
• 12V power supply operation (10A)
• Built-in protection circuits
• Case with a soft rubber surface
• Copper alligator clips
• 220–240-volt input
• 2 A at 6 volts
• 12.5 A at 24 volts
• 25 A at 12 volts

Designed for everyday use
The IBC25X is compact, easy to handle, and rugged. Its rubberized housing absorbs shocks and ensures a secure grip. Copper terminals ensure a reliable connection, minimize resistance, and maintain a consistent charging rate.

Suitable for a wide range of vehicles
This charger is equally suitable for passenger cars and vans as well as for motorcycles, trucks, RVs, and boat batteries. In 12-V mode, electrical components can also be powered directly, which is particularly helpful when replacing a battery or troubleshooting the vehicle’s electrical system.

Intelligent Nine-Stage Charging Process
The charging process begins with an analysis of the battery’s condition. If the cells are deeply discharged, a recovery phase is initiated first, before the charge is slowly built up to avoid voltage spikes. During the main charging phase, the battery is quickly charged to full capacity

The system then switches to absorption mode and fully charges the battery. Afterward, it checks whether the battery is holding the charge properly. In the final phases, the voltage is maintained using pulses, and the output power is stabilized as needed. Finally, the system safely shuts down to prevent overcharging

The result is a high-performance battery with a long service life and outstanding performance—and thus a reliable vehicle. Never get stranded again just because your car won't start.

Safety from Start to Finish
The IBC25X operates on standard 220–240 V AC power and features protective mechanisms that safeguard both the battery and the charger. These include automatic shut-offs in the event of overheating, reverse polarity, short circuits, and voltage instability.



Specifications
Charging voltages: 6 V / 12 V / 24 V


Battery types:

• 6 V – Lead-acid battery
  
• 12 V – Lead-acid battery & lithium iron phosphate battery
  
• 24 V – Lead-acid battery & lithium iron phosphate battery
  
  
  

Charging current:

• 2 A at 6 V (AGM/GEL/WET)
  
• 25 A at 12 V (AGM/GEL/WET/MF/LiFePO4)
  
• 12.5 A at 24 V (AGM/GEL/WET/MF/LiFePO4)
  
  
  

Charging voltage:

• 6 V (AGM/GEL/WET/MF) – 7.2 V ±0.2 V; 12 V (WET/MF) – 14.3 V ±0.2 V 
  
• 12 V (AGM/LiFePO4) – 14.6 V ±0.2 V; 24 V (WET/MF) – 28.6 V ±0.2 V
  
• 24 V (AGM/LiFePO4) – 29.2 V ±0.2 V
  
  
  

Battery capacity:

• 6 V (AGM/GEL/WET/MF) – 2.5–40 Ah
• 12 V (AGM/GEL/WET/MF) – 40–500 Ah 
  
• 12 V (LiFePO4) – 30–450 Ah
  
• 24 V (AGM/GEL/WET/MF) – 20–300 Ah;
• 24 V (LiFePO4) – 20–250 Ah
  
  
  

Additional information:

• Power supply mode: 12 V, 10 A;
  
• Input voltage: 220–240 V AC
  
  
• Advertisement: Backlit 
  
  
• LCD Protection Rating: IP20
  
• Housing: Rubber-coated
  
• Clamps: Alligator clips, copper;
  
• Operating temperature: -20 °C to +50 °C
  
• Dimensions: 305 x 127 x 73 mm