Phoenix Gold ZP8000.1

The Phoenix Gold ZP8000.1 is an uncompromisingly powerful 1-channel amplifier designed for demanding SPL and pro audio systems. With up to 8,000 watts RMS at 1 ohm, it is not only suitable for high-power subwoofers but, thanks to its wide frequency range, also for midbass and midrange driver applications.

The efficient full-range Class D circuit combines enormous output power with comparatively compact dimensions. Two solid 50-mm² terminals for power and ground, high-quality SMPS transformers, and a reinforced high-current circuit board ensure stable operation even under heavy loads.

High-pass and low-pass filters can be flexibly adjusted. This allows the ZP8000.1 to be specifically tailored to the speaker range being used. An adjustable bass boost offers additional tuning options. The built-in clip indicator helps ensure the input level is set correctly and aids in detecting signal-related distortion early on.

To ensure reliable signal transmission, the amplifier features high-quality Tiffany RCA connectors. Sealed potentiometers reduce the risk of interference from moisture, oxidation, and corrosion. The included remote control, complete with a five-meter connection cable, allows for convenient adjustments from the driver's seat.

Product Features

• High-Performance Full-Range Monoblock for SPL and Pro Audio Applications
• Up to 8,000 watts RMS at 1 ohm
• Suitable for subwoofers, mid-bass drivers, and midrange drivers
• Efficient Full-Range Class D Technology
• Full-Bridge Circuit Configuration
• High-Quality SMPS Power Supply Transformers
• Reinforced high-current circuit board for high load capacity
• Two power and ground connections, each with a cross-sectional area of 50 mm²
• High-quality Tiffany RCA connectors
• Enclosed potentiometers protected against external influences
• Adjustable High-Pass Filter
• Adjustable Low-Pass Filter
• Adjustable Bass Boost
• Built-in clip LED to assist with gain adjustment
• Status Indicator for the Protective Circuit
• Short-Circuit and Over-Temperature Protection
• Protection against excessively high or low supply voltage
• High-level input for connecting to factory-installed radios
• Remote control for the water level gauge with a five-meter cable included
  
  

Technical Specifications

• Manufacturer: Phoenix Gold
• Model: ZP8000.1
• Amplifier Type: Full-Range Monoblock
• Amplifier Class: Class D
• Number of channels: 1
• RMS power at 1 ohm: 1 × 8,000 watts
• RMS power at 2 ohms: 1 × 4,300 watts
• RMS power at 4 ohms: 1 × 2,300 watts
• Frequency response: 12 Hz to 15 kHz
• Signal-to-noise ratio at full power: −88 dB, according to the manufacturer
• Total harmonic distortion: less than 1%
• Low-pass filter: 50 Hz to 15 kHz
• Low-pass filter slope: 24 dB/octave
• High-pass filter: 15 Hz to 1 kHz
• High-pass filter slope: 24 dB/octave
• Bass Boost: 0 to +18 dB
• Bass boost frequency range: 35 to 100 Hz
• Input sensitivity: 0.25 to 4 volts
• High-level input: available
• Automatic power-on: Not available
• Wired volume remote control: included
• Operating voltage: 9 to 16 volts
• Standby current consumption: 1.7 amps
• Maximum current draw: 723 amperes
• Overall efficiency at 4 ohms: 83%
• Power connections: 2 × 50 mm²
• Speaker connection: 20 mm²
• Dimensions: 373.4 × 206.4 × 63.3 mm
• Weight: 4.78 kg
  
  

What's Included

• 1 × Phoenix Gold ZP8000.1 Amplifier
• 1 × Volume Remote Control
• 1 × Remote control connection cable, 5 m long
• 4 × mounting screws for the amplifier
• 2 × mounting screws for the remote control
• 3 × Allen wrenches
• 1 × User Manual