Mosconi Pro 8|30 EVO

The Mosconi PRO 8|30 DSP EVO combines eight powerful analog Class AB amplifier channels with an integrated 12-channel digital signal processor, offering a high-quality, all-in-one solution for sophisticated car audio systems. Thanks to state-of-the-art N-channel MOSFET technology, precise signal processing, and extensive adjustment options, this power amplifier delivers exceptionally detailed, dynamic, and controlled music reproduction.

The asymmetrical power distribution—with 4 × 90 watts and 4 × 170 watts RMS at 4 ohms—enables optimal drive of various speaker components. While the smaller channels power tweeters and midrange drivers, for example, the more powerful channels are ideal for woofers. In addition, four freely configurable DSP RCA outputs are available for connecting additional amplifiers.

The integrated 12-channel DSP with 96 kHz / 24-bit resolution offers extensive options for custom sound optimization. With 30 parametric equalizer bands per channel, precise time alignment, flexible crossovers, and four storable presets, the audio system can be precisely tuned to the vehicle’s acoustics.

With eight individually configurable analog inputs, high-level support with autosense, Class SB compatibility, and an optical digital input, the PRO 8|30 DSP EVO is suitable for both high-quality retrofit systems and integration into modern factory installations. Input configuration is performed channel by channel using DIP switches.

A high-performance push-pull switching power supply, high-quality gold-plated connectors, a four-layer printed circuit board, and temperature-controlled cooling ensure reliable operation even under high power demands.

Technical Specifications

Performance Data:

• Amplifier channels: 8

• RMS output power at 4 ohms: 4 × 90 watts + 4 × 170 watts

• RMS output power at 2 ohms: 4 × 115 watts + 4 × 220 watts

• RMS bridged power at 4 ohms: 2 × 230 watts + 2 × 440 watts

• Amplifier Class: Class AB

• Output stage technology: N-channel MOSFET

• Bridge Mode: Supported at 4 ohms
  
  

Amplifier Technology:

• Frequency response: 20 Hz – 20 kHz (−3 dB)

• Total Harmonic Distortion (THD) at 4 ohms: < 0.05% (1 kHz, 90% of rated power)

• Total Harmonic Distortion (THD) at 2 ohms: < 0.055% (1 kHz, 90% of rated power)

• Signal-to-noise ratio: 100 dB(A), relative to rated power

• Damping factor at 4 ohms: > 105

• Channel separation: > 66 dB (based on 10 watts)

• Amplifier Circuit: Analog Class-AB Power Stages
  
  

DSP and Signal Processing:

• Integrated DSP: 12 channels

• DSP resolution: 24 bits

• DSP sampling rate: 96 kHz

• DSP processor: 32-bit / 294,912 MHz

• Parametric equalizer: 30 bands per channel

• High-pass filter: 10 Hz – 20 kHz

• Low-pass filter: 10 Hz – 20 kHz

• Bandpass filter: Supported

• Filter slope: 6–12 dB/octave per filter stage

• Maximum filter slope achieved through cascading: 60 dB/octave

• Adjustable Q-factor: 0.5–40

• Runtime correction: 0–15 ms

• Runtime correction step size: 0.01 ms

• Phase reversal: 0° / 180° per channel

• Storable DSP presets: 4

• Custom Signal Processing: For All 12 DSP Channels

• DSP Configuration: Via USB and compatible Mosconi DSP software
  
  

Inputs and Outputs:

• Analog Inputs: 8 × RCA

• Low-level input sensitivity: 2 V RMS

• High-level input sensitivity: 15 / 30 V RMS

• High-Level Class SB Support: 15 V RMS

• Low-level input impedance: 10 kΩ

• High-level input impedance: 600 Ω or approximately 6 Ω

• Input Configuration: Channel-by-channel via DIP switches

• High-Level Autosense: Supported, can be disabled / BTL

• Digital Input: 1 × Toslink optical

• Expansion Interface: EXT_CARD

• DSP preamp outputs: 4 × RCA

• Output voltage of DSP RCA outputs: 2 V RMS

• Programming port: USB

• Compatible remote controls: Mosconi DSP-RCD, DSP-RC mini, and GLADIATOR (optional)
  
  

Power Supply and Protection Features:

• Operating voltage: 10–16 V DC

• Power Supply Technology: Unregulated Push-Pull DC/DC Switching Power Supply

• Power supply switching frequency: 50 kHz

• Fuse rating: 150 A

• Overall efficiency: > 65%

• Quiescent current at 14.4 V: 1.8 A

• Standby current consumption: < 2 mA

• Remote output: 10–16 V / 100 mA

• Power-on delay (mute): 3 seconds

• Start-Stop Support: Voltage dip down to 7.5 V for a maximum of 300 ms

• Temperature-controlled fan cooling: Available

• Fan activation: At 50 °C or higher

• Fan shutdown: At 45 °C

• Thermal Cut-Off: At 90 °C

• Restart after overtemperature: At 70 °C
  
  

Dimensions and Workmanship:

• Dimensions (W × D × H): 500 × 205 × 55 mm

• Weight: 5.2 kg

• Case Color: Black / Titanium

• PCB Design: 4-layer FR4 PCB

• Copper thickness: 70 µm

• PCB Surface: Gold-Plated

• Terminals: Gold-plated

• Cooling: Temperature-controlled fan
  
  

What's Included

• 1 × Mosconi PRO 8|30 DSP EVO 8-channel DSP amplifier

• 1 × User's Manual