Mosconi Pico 8|10 DSP v2

The Mosconi PICO 8|10 DSP V2 is a compact and powerful 8-channel Class D amplifier with an integrated 10-channel DSP. The second generation of the PICO series impresses with improved sound quality, higher efficiency, and expanded connectivity options. With up to 600 watts of total power, the amplifier is ideal for high-end car audio systems and integration into modern vehicles with factory-installed sound systems.

Thanks to eight versatile high-level and low-level inputs, digital interfaces, and extensive DSP functions, the PICO 8|10 DSP V2 allows for precise adaptation to virtually any vehicle’s acoustics. The highly efficient PWM amplifier technology, with a carrier frequency of over 2 MHz, ensures exceptionally low-noise and detailed music playback.

All connections are located on one side of the housing to save space. The most important configuration switches are housed under the magnetic cover. The USB-C port allows you to conveniently adjust all DSP settings on your computer. Thanks to its compact dimensions, the amplifier is ideal for concealed installation behind vehicle trim panels.

Technical Specifications

Amplifiers and Output Power

• Amplifier Type: 8-channel Class D DSP amplifier

• Integrated digital signal processor: 10 channels

• Amplifier Technology: High-Speed PWM

• PWM carrier frequency: over 2 MHz

• Total power: up to 600 watts

• Output power at 4 ohms: 4 x 50 watts RMS (channels 1–4)

• Output power at 4 ohms: 4 x 80 watts RMS (channels 5–6 and 9–10)

• Output power in bridge mode at 4 ohms: 4 x 45 watts + 2 x 210 watts RMS

• Minimum impedance for channels 1–4: 3 ohms

• Minimum impedance for channels 5–6 and 9–10: 2 ohms

• Bridge operation: channels 5–6 and 9–10 only

• Channels 1–4: Cannot be bridged

• DSP-controlled preamp outputs: 2 x 2 V RMS (channels 7–8)

• Overall efficiency: over 80%

• Total Harmonic Distortion plus Noise (THD+N): approx. 0.02% at 1 watt (manufacturer's specification for PWM technology)
  
  

Analog and Digital Inputs

• Analog Signal Inputs: 8 x high-level / low-level, switchable

• High-Level Compatibility: Class SB-compatible

• Supported high-level signal range: up to 30 V RMS

• Low-level input sensitivity: 2 V RMS

• High-level input sensitivity: 15 V RMS standard, up to 30 V RMS

• Optical Digital Input: 1 x S/PDIF (Toslink)

• Coaxial Digital Input: 1 x S/PDIF (Coax)

• Supported S/PDIF sample rates: 8–96 kHz

• Digital Bluetooth Port: S/PDIF-TTL, 8–96 kHz

• Advanced Digital Audio Port: BT+

• BT+ sampling rates: 8–384 kHz

• BT+ Audio Channels: 2–16 channels

• Direct digital DSP signal transmission via BT+ without additional jitter

• Support for compatible Mosconi Bluetooth streaming modules
  
  

Digital Signal Processor (DSP)

• DSP Architecture: 32-bit Audio Port with 64-bit Core

• DSP clock frequency: 912 MHz

• Filter calculation: 56-bit double precision

• DSP sampling rate: 96 kHz

• Parametric Input Equalizer: 3 x 9 bands

• Dynamic de-equalization to correct factory-set frequency responses

• Input delay correction: 6 channels

• Input delay adjustment range: 0–3 ms

• Input delay resolution: 0.01 ms

• Digital input level control: 10 channels

• Flexible Signal Routing with Addition and Subtraction

• Output Group Equalizer: 6 x 30 bands or 4 x 30 bands + 2 x 15 bands

• Output filter: 8 x 10 bands

• Filter types: high-pass, low-pass, high-shelf, low-shelf, notch, all-pass, and speaker EQ

• Filter orders: 1st through 4th order

• Speaker delay correction: 0–12 ms

• Speaker delay resolution: 0.01 ms

• Phase reversal: 8 speaker channels

• Flexible Phase Control with a Calculation Tool

• Integrated Analysis and Measurement Functions

• B.A.R.N.I.E.-compatible
  
  

Connections and Control

• PC Connection: USB-C for DSP configuration

• Remote input: 1 x

• Remote output: 1 x

• Automatic activation via a high-level signal: BTL Auto-Sense

• Analog remote control connection: 1 x for Mosconi RTC.2

• Advanced Control Connection: BT+

• Support for MOS-BT3.0 app control

• Support for RC-CAN CAN Bus Control

• Compatible with MOS_USB2.0, BTS-LD4C, and Gladiator Controller

• Connection contacts: MOLEX connectors

• Configuration switches under a magnetic housing cover
  
  

General Technical Specifications

• Operation: 12-V and 24-V vehicle systems according to the manufacturer's overview

• Supply voltage according to the user manual: 10–16 V DC

• Built-in fuse: 1 x 30 A

• Amplifier efficiency: over 80%

• Cooling: passive, via the amplifier housing

• Design: compact multichannel amplifier

• Dimensions (W x D x H): 150 x 160 x 46 mm

• Weight: 1,150 g
  
  

What's Included

• 1 Mosconi PICO 8|10 DSP V2 amplifier

• Connectors and connection accessories as included in the manufacturer's shipment

• User Manual / Installation Instructions