Mosconi Pico 6|8 DSP v2

The Mosconi PICO 6|8 DSP V2 is a compact and powerful 6-channel Class-D amplifier with an integrated 8-channel digital signal processor (DSP). The second generation of the PICO series impresses with improved connectivity, optimized sound quality, and exceptionally high efficiency. With up to 440 watts of total power, the amplifier is ideal for high-end car audio systems and integration into existing factory sound systems.

With eight flexibly configurable high-level and low-level inputs, extensive DSP functions, and two additional RCA outputs, the PICO 6|8 DSP V2 allows for customization of the audio system. The powerful DSP technology with a 96-kHz sample rate offers precise adjustment options for equalizers, crossovers, time alignment, and phase alignment.

The highly efficient PWM power amplifiers operate at a carrier frequency of over 2 MHz and enable exceptionally low-noise signal processing. All connections are located on one side of the housing, while important configuration switches are protected by a magnetic cover. The integrated DSP can be conveniently configured on a computer via the USB-C port.

Thanks to its compact design, low heat generation, and compatibility with 12-V and 24-V vehicle electrical systems, the Mosconi PICO 6|8 DSP V2 is also ideal for space-saving and virtually invisible installations.

Technical Specifications

Amplifiers and Output Power:

• Amplifier Type: 6-channel Class D amplifier with integrated 8-channel DSP

• Amplifier Technology: Highly Efficient PWM Power Stages

• Total power: Up to 440 watts

• Output power at 4 ohms, channels 1–4: 4 × 50 watts

• Output power at 4 ohms, channels 5–6: 2 × 80 watts

• Output power in bridge mode at 4 ohms: 4 × 45 watts + 1 × 210 watts

• Minimum impedance, channels 1–4: 3 ohms, cannot be bridged

• Minimum impedance for channels 5–6: 2 ohms, bridgeable

• Preamp outputs: 2 × 2 V RMS

• Overall efficiency: Over 80%

• PWM carrier frequency: Over 2 MHz

• Total Harmonic Distortion (THD+N): Approx. 0.02% at 1 watt
  
  

Signal inputs:

• 8 × analog inputs, switchable between high-level and low-level

• High-Level Inputs: Class SB-Compatible

• Low-level input sensitivity: 2 V RMS

• High-level input voltage: Up to 15 V RMS by default, maximum 30 V RMS

• 1 × optical S/PDIF digital input, 8–96 kHz

• 1 × coaxial S/PDIF digital input, 8–96 kHz

• 1 × digital BT port with S/PDIF-TTL, 8–96 kHz

• 1 × Advanced Digital BT+ Audio Port

• BT+ Sample Rate: 8–384 kHz

• BT+ Audio Transmission: 2–16 channels

• Support for compatible Mosconi Bluetooth streaming modules
  
  

DSP processor:

• Integrated 8-channel digital signal processor

• Processor clock speed: 912 MHz

• Processor core: 64-bit

• Audio Port: 32-bit

• Filter calculation: 56-bit double precision

• DSP sample rate: 96 kHz

• 3 × parametric 9-band input equalizer

• 6 × input delay correction from 0–3 ms

• Input runtime correction step size: 0.01 ms

• 10 × digital input level controls

• Flexible signal routing with summing and subtracting functions

• Parametric Group Equalizer: 6 × 30 bands or 4 × 30 + 2 × 15 bands

• 8 × output filters, each with 10 bands

• Filter types: high-pass, low-pass, high-shelf, low-shelf, notch, all-pass, and speaker EQ

• Allpass filters: 1st through 4th order

• Output runtime correction: 0–12 ms

• Output delay correction step size: 0.01 ms

• 8 × Speaker Phase Switches

• Flexible Phase Correction with a Calculation Tool

• Integrated Analysis Tools

• B.A.R.N.I.E.-compatible
  
  

Connections and Controls:

• USB-C port for DSP configuration

• 1 × analog remote connection for the RTC.2 remote control

• 1 × BT+ Control Port for compatible Mosconi accessories

• 1 × Remote Input

• 1 × Remote Output

• Automatic activation via a high-level signal

• Auto-On Function: Off / BTL

• Can be turned on using a pilot tone

• MOLEX Connectors

• Support for compatible Bluetooth, CAN bus, and remote control modules
  
  

General Information:

• Operating voltage: 12 V / 24 V

• Housing: Compact metal housing with magnetic cover

• Dimensions (W × D × H): 150 × 160 × 46 mm

• Weight: 1,150 g

• DSP Configuration Using Mosconi DSP Software

• Suitable for OEM sound systems and custom car audio installations
  
  

What's Included

• 1 × Mosconi PICO 6|8 DSP V2 DSP Amplifier

• Connection and Installation Accessories

• Operating and Installation Instructions