P1000X5

The Rockford Fosgate P1000X5 from the high-performance Punch series is a premium 5-channel amplifier designed specifically for demanding car audio systems. With its combination of Class A/B technology for the four speaker channels and efficient Class bd technology for the subwoofer channel, it allows you to power an entire sound system with just one amplifier.

The four main channels deliver powerful and precise sound reproduction for front and rear speakers, while the separate subwoofer channel provides up to 500 watts RMS at 1 ohm. Thanks to the built-in crossovers, Punch EQ tone control, and C.L.E.A.N. technology, the amplifier can be optimally tuned to different speaker configurations.

The rugged aluminum housing ensures reliable heat dissipation. Comprehensive protective circuits against overheating, overcurrent, and short circuits ensure safe operation even under heavy loads.

Technical Specifications

General Characteristics

• Model: Rockford Fosgate P1000X5

• Series: Punch

• Amplifier Type: 5-Channel Car Hi-Fi Amplifier

• Amplifier technology: Class A/B (channels 1–4) and Class bd (subwoofer channel)

• Total power: up to 1,000 watts RMS

• Operating voltage: 9–16 V DC

• Output power according to CTA-2006 at 14.4 V

• 4-Channel Bridgeable Range

• Separate, 1-ohm-stable subwoofer channel

• Integrated Active Crossovers

• C.L.E.A.N. System for Adjusting Input and Output Levels

• Punch EQ Tone Control

• High-level inputs with automatic power-on function

• Solid aluminum housing for heat dissipation

• Protection against short circuits, overcurrent, and overheating
  
  

RMS Power, Channels 1–4 (Class A/B)

• 4 × 75 watts RMS at 4 ohms

• 4 × 125 watts RMS at 2 ohms

• 2 × 250 watts RMS bridged at 4 ohms

• Minimum impedance: 2 ohms (stereo) / 4 ohms (bridged)
  
  

RMS Power, Channel 5 (Class bd Subwoofer)

• 1 × 150 watts RMS at 4 ohms

• 1 × 300 watts RMS at 2 ohms

• 1 × 500 watts RMS at 1 ohm

• Minimum impedance: 1 ohm
  
  

Crossover Networks and Sound Settings

• High-pass filter (HPF): 50–250 Hz

• Low-pass filter (LPF): 50–250 Hz

• Filter slope: 12 dB/octave

• Subwoofer low-pass filter: 50–250 Hz

• Infrasonic filter for subwoofers: 28 Hz

• Punch Bass EQ: 0 to +18 dB at 45 Hz

• Punch Treble EQ: 0 to +14 dB at 12.5 kHz

• Adjustable Input Sensitivity

• Switchable Input Configuration

• Separate subwoofer input
  
  

Electrical and Acoustic Specifications

• Frequency response: 20 Hz – 20 kHz (main channels)

• Input sensitivity: 150 mV – 12 V

• Input impedance: 20 kOhm

• Total Harmonic Distortion plus Noise (THD+N): less than 1.0%

• Signal-to-noise ratio according to CTA-2006: over 85 dB (main channels)

• Signal-to-noise ratio according to CTA-2006: over 80 dB (subwoofer)

• Signal-to-noise ratio at rated power: over 105 dB (main channels)

• Signal-to-noise ratio at rated power: over 100 dB (subwoofer)

• Channel separation: over 50 dB

• Common-mode rejection: over 55 dB

• Damping factor: over 500 (main channels)

• Damping factor: over 300 (subwoofer)

• Recommended external battery fuse rating: 150 A
  
  

Connections and Features

• RCA low-level inputs

• High-Level Inputs for Factory-Installed Radios

• Automatic Power-On Function When a High-Level Signal Is Detected

• Remote Connection

• Speaker connections for five channels

• Connector for optional PLC2 bass remote control

• Status and Clipping Indicators

• Protected control panel on the top of the housing
  
  

Dimensions

• Length: 382 mm

• Width: 197 mm

• Height: 61 mm
  
  

What's Included

• 1 × Rockford Fosgate P1000X5 5-channel amplifier

• 1 × User and Installation Manual

• Installation hardware

• Performance Certificate