Audison APK 165 Ohm2

The APK 165 ohm2 system has 2 crossovers dedicated to the woofer and the tweeter, which are separated to facilitate installation. The APCX WF ohm2 crossover optimally matches the frequency response of the AP 6.5 Ohm2 to the AP 1 tweeter and uses a low ESR inductor to maximize power transfer to the 2-ohm coil. The crossover of the APCX TW ohm2 tweeter, on the other hand, is equipped with the Hi-Contour function to boost the high frequencies and achieve the right sound balance with the rich low frequencies of the woofer.


Features:

• 2-Ω impedance for optimum utilization of the 65 W power per channel of the AP8.9-bit amplifier at 2 Ω
  
• Resonant frequency of 75 Hz to extend the frequency range up to 50 Hz and for higher sound pressure in the bass range
  
• 25 mm voice coil for a high efficiency of 95 dB
  
• Voice coil with 10 mm winding height for maximum linear excursion of 2.8 mm and low distortion even at high volumes
  
• APCX WF 2Ω woofer crossover with low-loss coils for optimum coordination with the tweeter
  
• APCX TW 2Ω tweeter crossover with hi-contour function for boosting high frequencies and balanced sound balance
  
• AP 1 tweeter with acoustic lens to optimize the frequency response between 10 kHz and 13 kHz, especially for OEM installation positions
  
• Integrated connection cable with fast-on connectors in the passive crossover for simple and safe OEM integration
  
• AP 6.5 2Ω woofer with water-repellent paper cone, developed using FEM simulation and Klippel Scan Vibrometer
  
• Reduced installation depth of the woofer for easy installation in OEM mounting positions
  
• TPU surround with "Triple Wave" profile for maximum linear cone movement
  
• Compact woofer basket with abrasion- and scratch-resistant coating and damping epoxy adhesive
  
• High-current quick-connect terminal block with double contact and temperature-resistant protective cover to prevent short circuits
  
• Developed with the KLIPPEL suite
  
  

Technical data:

• Woofer size:
  165 mm (6.5 inch)
  
• Impedance:
  2 Ω
  
• Peak load capacity:
  300 W
  
• Continuous load capacity (RMS):
  100 W
  
• Frequency response:
  50 Hz - 20 kHz
  
• Diameter of the voice coil woofer:
  25 mm (0.98 inch)
  
• Magnet size:
  85 × 32 × 15 mm
  
• Crossover:
  Crossover frequency at 4.5 / 5 kHz
  
• Level adjustment crossover:
  +2 / 0 dB
  
• Tweeter size:
  26 mm (1 inch)
  
• Diameter of the tweeter voice coil:
  20 mm (1.26 inch)