Audison APK 165

The two-way system is equipped with an AP 1 tweeter and an AP 6.5 woofer. The APCX TW crossover has a two-stage level selector that can be used to adjust the response to the two main applications: +2 dB when installed behind the OEM grille and 0 dB for an A-pillar installation without an additional grille between the tweeter and the receiver. To facilitate installation in OEM positions, the woofers are equipped with high-current quick-connect terminals with double contact on positive and negative poles for high flexibility and fast connection.


Features:

• The AP 1 tweeter with 26 mm diaphragm diameter in combination with a broadband surround ensures maximum efficiency and reduced resonance frequency.
  
• AP 1 tweeter with an acoustic lens designed to compensate and fine-tune anomalies in the vehicle's frequency response in the 10kHz to 13kHz range caused by restrictive OEM grilles at critical OEM positions.
  
• APCX TW is a very compact passive tweeter crossover optimized for OEM integration and equipped with an attenuation switch (0 dB, +2dB) to adjust the response in the vehicle according to the different installation conditions.
  
• Passive crossovers are supplied with quick connectors that comply with OEM integration. The ends, which differ in each of the two poles, eliminate possible connection errors and speed up the installation time required.
  required installation time.
  
• AP 6.5 woofer with 32 mm pure copper voice coil for high power handling and excellent control of low frequencies.
  
• AP 6.5 woofer with a water-repellent treated paper cone whose profile was developed using FEM (Finite Element Method) simulation technology and optimized with the Klippel Scan Vibrometer.
  
• AP 6.5 woofer with reduced installation depth, which facilitates installation in OEM mounting locations.
  
• AP 6.5 woofer with TPU edge (thermoplastic polyurethane) and unique "Triple Wave" profile for maximum linearity of excursion.
  
• AP 6.5 woofer with compact basket, protected by an abrasion and scratch resistant coating, the motor is fixed with damping epoxy glue.
  
• AP 6.5 woofer with high-current quick-connect terminal with double contact on the positive and negative pole for high flexibility and fast connection. The terminal is fitted with a temperature-resistant plastic cover to protect it from accidental short circuits.
  
• Developed with the KLIPPEL suite.

Technical data TMT:

• Woofer Size:
  165 mm (6.5 in)
  
• Impedance:
  4 Ohm
  
• Load capacity - peak:
  300 W
  
• Load capacity - continuous operation:
  100 W
  
• Frequency response:
  60 ÷ 20k
  
• Voice Coil Diameter:
  32 mm (1.26 in)
  
• Magnet Size:
  85 x 40 x 15
  
• Crossover Level Adjustment:
  +2; 0
  
  

Technical data HT:

• Tweeter Size:
  26 mm (1 in)
  
• Voice Coil Diameter:
  20 mm (1.26 in)