Helix M One X - 24 Volt

HELIX M ONE X - 24 Volt Edition

Small, efficient and unconditionally stable - the M ONE X 24 Volt Edition is a highly compact monoblock for subwoofer applications. Built using the latest Class D technology, this amplifier can even handle speakers with an impedance of just 1 ohm. Its current delivery capacity makes it ideal for combination with 2 x 2 Ohm subwoofers, in which both voice coils are connected in parallel.

And for even more concentrated power, two M ONE X 24 volt amplifiers can even be connected together to form a large power pack thanks to the TwinPower link.

This is complemented by extensive and extremely practical equipment that leaves nothing to be desired. And finally, thanks to its small dimensions, there is always a place to install this mini power station.

Features

✓ Particularly compact Class D amplifier with up to 1,180 watts RMS maximum power at 1 ohm - ideal for combining with all 2 x 2 ohm subwoofers in parallel operation

✓ Start-stop capability down to 12V supply voltage

✓ Intelligent high-level input with ADEP circuit and automatic switch-on

✓ Integrated active crossover with low pass, bass boost, subsonic and phase

✓ TwinPower Link for the operation of two amplifiers in bridge mode

✓ Wired remote control for volume control

✓ Low heat generation thanks to very high efficiency

Special features:

✓ Intelligent high-level input

Modern, factory-installed car radios are becoming increasingly intelligent with regard to the diagnosis of the connected speakers. If an amplifier is connected to the radio instead, this usually results in error messages or even the loss of individual functions (e.g. faders). The new ADEP circuit (Advanced Diagnostics Error Protection) prevents all these problems without unnecessarily overloading the radio's speaker outputs at high levels.

✓ Start-stop capability

The power supply unit in the HELIX M ONE X amplifier ensures the internal power supply even in the event of short-term dips down to 12 volts. This ensures that the HELIX M ONE X remains fully functional even when the engine is started.

Technical data

Power RMS ≤ 1% THD+N	Normal operation (One amplifier)	TwinPower Link (two amplifiers)
- @ 4 Ohm	1 x 400 watts	1 x 1,400 watts
- @ 2 Ohm	1 x 700 watts	1 x 2,060 watts
- @ 1 Ohm	1 x 1,030 watts	-
- bridged to 4 Ohm	-	-
- bridged to 2 Ohm	-	-
Max. Power per channel*	Up to 1.180Watt RMS @ 1 Ohm
Amplifier technology	Class D
Inputs	2 x RCA 2 x high level speaker input 1 x Remote In 1 x remote control input
Input sensitivity	RCA 0.5 - 6 volts High level 1.1 - 13 volts
Input impedance Cinch	20 kOhm
Input impedance high level	9 - 33 Ohm
Outputs	1 x loudspeaker output
Output voltage RCA	-
Signal converter for the digital input	-
Frequency range	10 Hz - 250 Hz
Bass boost	0 - 12 dB / 30 - 80 Hz
High pass	-
Low pass	50 Hz - 250 Hz adjustable
Bandpass	10 Hz - 250 Hz adjustable
Subsonic	10 Hz - 50 Hz adjustable
Phase	0 - 180° adjustable
Edge steepness high / low pass	-
Subsonic / low-pass slope	12 / 24 dB/oct.
Signal-to-noise ratio Digital input	-
Signal-to-noise ratio analog input	95 dB (A-weighted)
Distortion factor (THD)	0,20 %
Attenuation factor	150
Operating voltage	18 - 36 volts (max. 5 sec. down to 12 volts)
No-load current consumption	400 mA
Fuse	3 x 20 A maxi plug-in fuse (FK3)
Additional features	Active, adjustable crossover, bass boost, phase shift, start-stop capability, high-level input with automatic switch-on and Advanced Diagnostics Error Protection (ADEP), bass level cable remote control
Dimensions	50 x 320 x 154 mm

✓ Scope of delivery

1 x Helix M ONE X amplifier - 24 volt

1 x cable remote control

1 x Mounting material

1 x operating instructions


🗒Operating instructions
☞(Download)

Shipping countries:
✓ Germany
✓ Austria
✓ France