Helix M One - 1 Kanal

HELIX M ONE

Small, efficient and unconditionally stable - the M ONE is a highly compact monoblock for subwoofer applications. Built using the latest Class D technology, this amplifier can handle even loudspeakers with an impedance of just 1 ohm in a controlled manner. Its ability to deliver current predestines it for the combination with 2 x 2 ohm subwoofers, in which both voice coils are connected in parallel.

In addition, there is extensive and extraordinarily practical equipment that leaves nothing to be desired. And finally, thanks to the small dimensions, there is always an installation space for this mini power plant.

Features

✓ Particularly compact class D amplifier with a high output power of 600 watts RMS at 1 ohm - ideally suited for the combination with all 2 x 2 ohm subwoofers in parallel operation

✓ Start-stop capability down to 6V supply voltage

✓ Intelligent high-level input with ADEP circuit (Advanced Diagnostics Error Protection) and automatic switch-on

✓ Integrated, active crossover with low pass, bass boost, subsonic and phase

✓ Extremely load-stable output stage with high-current power transistors and 1 ohm stability

✓ Wired remote control for volume control

✓ SMD technology (Surface Mounted Device) combines minimum space requirements with maximum reliability

✓ Exclusive, very compact design with illuminated HELIX logo and low heat generation thanks to very high efficiency

Special Features:

✓ Intelligent high level input

Modern, factory-installed car radios are becoming more and more intelligent when it comes to diagnosing the connected loudspeakers. If an amplifier is connected to the radio instead, error messages or the loss of individual functions (e.g. faders) usually occur. The new ADEP (Advanced Diagnostics Error Protection) circuitry prevents all of these problems without unnecessarily loading the radio's speaker outputs at high levels.

 

✓ start-stop capability

The power pack in the HELIX M ONE amplifier ensures the internal power supply even in the event of short-term dips down to 6 volts. This ensures that the HELIX M ONE remains fully functional even when the engine is started.

 

Technical specifications

Power RMS   ≤ 1% THD+N
- @ 4 Ohm	1 x 240 Watt
- @ 2 Ohm	1 x 410 Watt
- @ 1 Ohm	1 x 600 Watt
- bridged on 4 Ohm	-
- bridged on 2 Ohm	-
Maximum power pro Kanal*	Up to 720 watts RMS @1 Ohm
Amplifier- technology	Class D
inputs	2 x Cinch 2 x high level speaker input 1 x Remote In 1 x remote control input
input sensitivity	Cinch 0.5 - 6 Volts Hochpegel 1.1 - 13 Volts
input impedance Cinch	20 kOhm
Input impedance high level	13 Ohm
exits	1 x speaker output
output voltage Cinch	-
Signal converter for the digital input	-
frequency range	10 Hz - 250 Hz
Bass Boost	0 - 12 dB / 25 - 75 Hz
Hochpass	-
Tiefpass	50Hz - 250Hz adjustable
Bandpass	10 Hz - 250 Hz adjustable
Subsonic	10 Hz - 50 Hz adjustable
Phase	0 - 180° adjustable
Slope steepness high/low pass	-
Slope steepness subsonic / low pass	12 / 24 dB/oct.
Signal to noise ratio digital input	-
Signal-to-noise ratio analog input	95 dB (A-weighted)
Klirrfactor (THD)	0,20 %
damping factor	100
operating voltage	10.5 - 16 volts (max. 5 sec down to 6 volts)
no-load current consumption	650 mA
fuse	2 x 35 A maxi plug-in fuse (FK3)
Additional features	Active, adjustable crossover, bass boost, Phase shift, start-stop capability, high-level input with automatic switch-on and Advanced Diagnostics Error Protection (ADEP), bass-level cable remote control
Dimensions (H x B x T)	50 x 230 x 154 mm

✓ scope of delivery

1 x Amplifier Helix M ONE

1 * wired remote control

1 x mounting material

1 * Instruction Manual

🗒Instruction Manual
☞(Download)

Shipping countries:
✓ Germany
✓ Austria
✓ France